News

Selection Requirements For WPC Bathroom Doors

Selection requirements for WPC Bathroom Doors :

1. The surface flatness of wood-plastic doors Except for some special decorative wood-plastic doors, the surface of general standard wood-plastic doors is flat and smooth, and the flatness of wood-plastic doors made of good boards is up to the standard. If you find that the flatness of the door surface is obviously not enough when you are purchasing a wood-plastic door, then there must be a problem with its raw materials, so it is best not to buy it.

2. Facade paint treatment Before the wood-plastic door is sold, the surface will be treated with paint to make the door look more beautiful. However, if the surface paint treatment is not good, not only will it not have a decorative effect, but it will also affect the normal use of the wood-plastic door. We check whether the facade paint treatment is qualified, mainly from these three aspects.

First of all, look at the fullness of the paint film, touch the facade with your hands, and feel the feel of the facade. The paint film formed by good quality and strong cohesion paint is relatively thick.

Secondly, check whether the paintbrush on the facade is even and smooth. It is best to stand on the oblique side of the door, and through the reflection on the surface of the door, you can observe whether there are raised fine particles on the door and whether the paint film is smooth.

Finally, you can ask the manufacturer about the type of paint on the facade to see if the paint used on the selected wood-plastic door is qualified and contains harmful chemicals.
 
3. Manufacturing process Check whether the manufacturing process of the wood-plastic door is excellent and whether the details are handled well enough, such as whether the door panels are all aligned when splicing, whether the seams are uniform and small, and whether the door cover and the edge line are made of the same material.