News

Precautions For Maintenance Of WPC Interior Door

Precautions for door leaf installation of WPC interior door manufacturers:

First, distinguish the upper and lower openings of the door leaf. During installation, the door leaf should be padded with pearl cotton so that it does not directly touch the ground. The installation should ensure that the upper side is 3 times, the lower side is 7 times, and the left and right sides are 3mm each. Then open the corresponding door leaf package, and check whether the size, color, and opening direction of the door leaf meet the size, color, and opening direction required by the production workbook. Whether there are bumps, indentations, scratches, and wrong packages on each part, and whether the hardware that needs to be installed is correct and complete. Adjust the hinge to a good state to ensure that the door leaf is opened easily, without friction sound, flexible and open and close, and the door leaf is flat and vertical; after the door leaf is closed tightly, the sealing strip is tightly combined and does not swing. The paint on the surface of the door leaf and door casing shall not be damaged during the trimming of the hinge groove on the door leaf and door frame. When screwing on the hinge, guide the hole first, then screw the screw in with a screwdriver, and install the screw in the direction of the positive cross.

The maintenance precautions for WPC interior door are as follows:

Avoid hanging heavy objects, wipe with a soft cotton cloth

Do not hang heavy objects on the door, so as not to reduce the life; when opening and closing the door leaf, do not use too much force or the opening angle is too large; do not use too much force when wiping the glass, so as not to hurt the person.

When removing stains on the surface of the wooden door, wipe it with a soft cotton cloth, as it is easy to scratch the surface with a hard cloth. If the stain is too heavy, you can use neutral detergent, toothpaste, or furniture-specific cleaner, and then dry-wipe after removing the stain. Do not rinse with water or wipe with an overly wet rag to avoid warping and deformation of the wooden door. To maintain the surface cleanliness of the ecological interior doors, you can do a surface cleaning treatment once a month, which can keep the whole set of doors shiny and bright forever.

Be careful not to place the cloth soaked in neutral reagents or moisture on the surface of the wooden door for a long time, otherwise, it will damage the surface, discolor or peel off the finishing material on the surface.

Be careful not to rub too much on the edges and corners of the wooden door, otherwise, the paint on the edges and corners will fall off, and when hardware accessories such as hinges and locks become loose, please ask the professional staff of the manufacturer to repair them. When the door makes a sound when it is opened, it means that there is a problem with the hardware such as the hinge.

Prevent the interior door from being soaked in water for a long time, especially the lower end of the door casing. Regarding the moisture-proof problem, the finished interior doors produced by many manufacturers have done well, and the waterproof performance has been greatly improved. For example, many manufacturers have added moisture-proof boards, so that the indoor WPC door moisture-proof problem has been further improved. A better solution, is so that the bottom of the kitchen and bathroom door pockets is no longer afraid of water accumulation.