News

How To Install WPC Solid Doors

How to install WPC Solid Doors :

1. Opening the door. When installing the wood-plastic door, we first need to make a hole for the installation on the wall. The door opening can enhance the stability of the wood-plastic door, and even if it is closed for a long time, the door leaf will not be loosened.

2. The door cover combination, the door cover is also called the door frame by some people. The WPC doors and door covers we purchased are all delivered in a disassembled state. However, the split door covers are also numbered. In the process of assembling the door covers, we only need to combine them according to the numbers. During the assembly process, the connection of each interface should be tight and seamless, and the fixing accessories should be clamped tightly.

3. Door cover installation, after the door cover is assembled, we can install the door cover. During the installation process, use a hanging wire or a hanging hammer to level the door cover. Make sure the door pocket is level with the wall and perpendicular to the ground. The fixation of the door cover is fixed with styrofoam. The styrofoam is injected between the door cover and the door hole. After the styrofoam is dried, the door cover will be automatically fixed on the door cover. In addition, the excess styrofoam should be removed with a shovel, otherwise, it will affect the appearance.

4. Door leaf installation, the door leaf needs to be fixed with hinges or hinges. When we install the door leaf, we can install the hinge on the door cover first, so that it is convenient to test whether the installation of the door leaf is in place. In the process of installing the hinge, the direction of the hinge cannot be reversed, otherwise, the door will not be able to open and close.

5. Installation of door cover line, after the door leaf is installed, we can install the door cover line. This step is very simple, just put the door cover wire into the door cover groove, and then use glue to firmly fix the door cover line on the door cover. During the installation process, do not leave any gaps.